TDLC Sensor
  • Rapid on-line inspection: up to 1.52 m/sec (300 ft/min) maximum
  • Available with low profile belts for small container inspection
  • Available with single or dual sensors
  • User Interface Required: Can be used with the T550 or Pro Series user interface
TDLC Sensor
Detailed Information Below

TDLC Sensor Technical Specs

Overview Specifications Applications Related Products Downloads

Leak Inspection from the Top

TapTone's TDLC sensor is designed to measure pressure on foil and film sealed containers from the top of the container instead of the sides. This patented sensor achieves a more sensitive measurement than traditional testing methods.

The TDLC sensor can be configured on a Compression or Dual Sensor Compression system with standard or low profile belts.

A User Interface is required for operation of the TDLC sensor. The TDLC sensor is compatible with the T550 and PRO Series user interfaces..

Specification Description
OPERATING SPEED

​up to 1.52 m/sec (300 ft/min) maximum

CONVEYOR HEIGHT

Dual Sensor:  91.4 cm - 132 cm (36 - 52 in) ; with optional leg extensions: 121.9 - 162.5 cm (48 - 64 in)

Single Sensor: up to 2.18m (86 in) (based on 0.076m or 3 in container)

BELT OPENING

​Dual Sensor: 159 mm (6.25 in) maximum

Single Sensor: 117.8 mm (7 in) maximum

SHAFT ENCODER

Stainless steel

AC LINE VOLTAGE

230 VAC, 1 phase

REJECT OUTPUTS

2

ALTITUDE

Sea level to 3,035m (10,000 feet)

MATERIAL (Dual Sensor)

Transport Deck: Stainless steel

Frame Material: Stainless steel 

Wash Down:  Low-pressure water

MATERIAL (Single Sensor)

Transport Deck Material: Aluminum hard coat

Frame material finish: Stainless Steel

Wash Down: Low-pressure water

Leak detection in film and foil sealed containers

Teledyne TapTone / 49 Edgerton Drive North Falmouth, MA 02556 USA / ISO 9001 Certificate / Terms and Conditions
Phone: (508) 563-1000 / Fax: (508) 564-9945
Copyright 2017 Teledyne Technologies Incorporated. All rights reserved.